FireAngel CO-9X, Руководство пользователя

Страница: 10 / 24

8
POWER PACK
ACTIVATION
See diagram opposite
a Your detector comes complete with an
integrated power pack that will provide
power for its entire operational life. To
activate the power pack you need to pull
the disabling tab (see image). This will
in turn pull out the metal disabling clip,
which is attached to the end of the tab,
from the disabling socket which is situated
on the underside of the detector. Retain
the disabling tab for future use by taping
it to page 20 of this manual.
b When the detector is activated the Power
LED will begin to flash green once every
minute to indicate that the detector is
receiving power from the power pack and
is fully operational.
c Test the sounder, power pack and circuitry
by pressing and holding the centre of
the Test/Reset button briefly to confirm
that the detector is operating properly.
The sounder will sound as soon as the
button is pressed, and the Alarm LED
will illuminate red indicating that the
sounder is working and the power pack
is providing power to the unit. This test
for the sounder, power pack and circuitry
should be performed on a weekly basis.
This should be continued for the lifetime
of the product.
WARNING: Prolonged exposure to the
sounder in close proximity to your ears
may damage your hearing.
Under normal operating conditions, the
power pack will last for the lifetime of the
product ie. 7 years.
The detector will not protect against the risk
of carbon monoxide poisoning when the
power pack has drained.
WARNING: Prolonged exposure to
extreme high or low temperatures may
reduce the life of the power pack.