Fire Sense PH01-S XL Series, Инструкция по эксплуатации

Страница: 12 / 23

12
Step 8: Attach the top section of 2-pc post to the bottom section
Hardware Used: None
Attach the top section of the 2-pc post assembly to the bottom section by screwing
the top section clockwise onto the bottom section of the post assembly until the
connection is tight.
Step 9: Install the tank housing
Hardware Used: None
Place the Tank Housing (6) over the top of the assembled 2-pc Post and slide it down
the post and over the Post Supports until it comes to rest on top of the base.
Step 10 : Optional : Install adjustable drink table assembly
( For XL Series Models which include a table assembly)
Hardware Used: None
Some XL Series models include an adjustable drink table assembly which may be installed on the heater.
If you wish to install this feature, please follow the instructions below (no tools required for assembly)
FIG 1 : Slide 1 piece part B over part A and up
to the top of part A.
FIG 2 : Insert part A through hole in part C.
FIG 3 : Slide 1 piece part B over part A until it
is flush against the underside of part C.
FIG 4 : Screw part D onto end of part A and up
until it is flush with the underside of part C.
FIG 5 : Slide part E down over pole, then slide
table assembly over pole and stop at desired
height.
FIG 6 : Screw part E over part A to secure
table in position. Once table is at desired
height, tighten part E.
ASSEMBLY