17
11. Locate the battery pack and remove the cover and place an AA Battery in
the unit. Screw the cap back on to the battery case tightly.
12. Empty the lava rocks into the fire pit bowl. Always ensure the guard is free
of lava rocks at all times.
18
Perform leak test in a well ventilated area outside and where no source of
spark can occur.
Remove battery from igniter. Open tank valve fully (counter-clockwise).
Turn the on/off valve at the unit to the ‘off’ position to pressurize the hose
assembly. Use a soapy water solution to check all the connections leaks
before attempting to light the appliance. If a leak is found, turn the tank
valve off and do not use the appliance until repairs can be made.
Before Starting:
• Read the instructions thoroughly.
• Check and make sure that all parts are present.
• For future reference, save this instruction manual.
TO LIGHT
Before each use, inspect the hose. Replace hose if there are any signs of
cutting, wear or abrasion.
(1) Turn the cylinder valve on the gas tank counter-clockwise to open the
gas supply.
(2) Close the storing door on the fire bowl for the gas tank.
(3) Light the fire bowl as below steps:
A.
Push the ignition button in and rotate the control knob 1/4 turn
counter clockwise until a click is heard, it may take several attempts
to light the burner. Once lit, keep holding the control knob for 15
seconds.
Diagram 1 Diagram 2
After connecting the gas regulator to the gas cylinder, please ensure that the
hose is straight (see diagram 1) and not coiled or touching the underside of
the fire bowl (see diagram 2). Otherwise the hose may melt and cause a fire.
