manualshive.com logo in svg

Fire-Lite MS-2410BC, Программирование, установка, обслуживание и руководство по эксплуатации

Поделиться
Скачать
Fire-Lite MS-2410BC Скачать руководство пользователя страница 12

Optional Modules

12

                                                                  Document #50801     Rev.B    8/17/98     P/N 50801:B

Cabinet

The cabinet is red and the backbox measures 20.00" (50.8 cm) long X 17.00" (43.18 cm) high  X 3.125"(7.938 
cm) deep and provides space for two batteries (up to 7 Amp Hours).  Also included is a dress panel, DP-2410BC, 
which comes premounted inside the cabinet.

Transformer Assembly

One 100VA transformer is provided standard with the panel.  
An optional 100VA transformer, XRM-24, is available to 
provide maximum accessory power.

Batteries

The cabinet provides space for 7 Amp Hour batteries (larger 
batteries up to 18 Amp Hour batteries, use the listed Fire•Lite 
BB-17F battery box).  Batteries must be ordered separately.

1.6

Optional Modules

LED-10IM

The LED-10IM Interface Module provides an EIA-485 port to support the LED-10 Series Remote Annunciator, 
LDM Series Annunciator, AFM Series Annunciator and ACM-8RF Relay Modules.  EIA-485 wiring is 
supervised for short, open and grounded circuits by this module.  The LED-10IM mounts to connector J5 on the 
main circuit board.

4XTMF Transmitter Module

The 4XTMF provides a supervised output for local energy municipal box transmitter and alarm and trouble 
reverse polarity.  It includes a disable switch and disable trouble LED.  A module jumper option allows the reverse 
polarity circuit to open with a system trouble condition if no alarm condition exists.

1.7

Optional Accessories

Dress Panel

A red dress panel (DP-2410BC) is supplied and is required for Canadian installations.  The dress panel restricts 
access to the system wiring while allowing access to the membrane switch panel.  Refer to Figure 1-1, “DP-
2410BC,” on page 7.

FIGURE 1-5:

MS-2410BC Cabinet

Standard XRM-24

Optional XRM-24

FIGURE 1-6:

Transformer Assemblies

Содержание MS-2410BC

































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды