Fire-Lite LDM-32F, Инструкция по эксплуатации

Страница: 56 / 64

Appendix C: MS-9600 Configuration
56
LDM-32F PN 50055:C 03/20/01
Alarm Only Annunciation of Points
The following table displays an example of setting up an LDM Series to
annunciate the control panel’s SLC Loop #1, Modules M65 to M128 in
Alarm Only mode.
By referring to Table 23 on page 52 it can be determined what address can be
set to annunciate any other group of address points.
Table 28 Alarm Only Setup
Alarm/Trouble Annunciation of Points
The following table displays an example of setting up an LDM Series to
annunciate the control panel’s SLC Loop #1, Modules M65 to M128 in
Alarm/Trouble mode. (See Figure 36 on page 55).
By referring to Table 23 on page 52 it can be determined what address can be
set to annunciate any other group of address points.
Table 29 Alarm/Trouble Setup
LDM Module
Address ‘05’
(SLC Loop #1) LDM Output Connectors
J5 J6 J7 J8
LDM-32F M65 to M72 M73 to M80 M81 to M88 M89 to M96
LDM-E32F M97 to M104 M105 to M112 M113 to M120 M121 to M128
LDM Module
Address ‘05’
(SLC Loop #1) LDM Output Connectors
J5 J6 J7 J8
LDM-32F M65 to M68 M69 to M72 M73 to M76 M77 to M80
1st LDM-E32F M81 to M84 M85 to M88 M89 to M92 M93 to M96
2nd LDM-E32F M97 to M100 M101 to M104 M105 to M108 M109 to M112
3rd LDM-E32F M113 to M116 M117 to M120 M121 to M124 M125 to M128