Version: June 2018
22
How to lay Forest Logs Firebed - GD5 1200
• Lay logs and large rocks first, in these positions.
• Lay rocks next, in these positions.
• With glass still removed, switch
the appliance
on at
‘HIGH’ setting to check how flame looks. The flame will take 10-20
seconds to light fully.
•
IMPORTANT:
the flame effect should look natural and non-uniform, running the entire length of the burner.
• Common flame effect issues are:
o
Flame touching edge of burner tray.
o
Missing flames along length of burner.
• Both these issues can be resolved by switching the appliance off and slightly repositioning rocks and logs at
the problem areas.
• Repeat this switching on/off and repositioning until a natural and non-uniform flame effect is achieved.
• Once a natural and non-uniform flame effect is achieved, switch the appliance to ‘LOW’ setting and ensure
the flame effect, although smaller, still looks good.
• Switch the appliance off and carefully replace glass by simply reversing the glass removal process.
• Switch the appliance on and check that flame effect still looks natural and non-uniform.
•
Note:
it is normal for the glass to mist a little when the appliance is first switched on. This will quickly
disappear.
