Fiplex TETRA Compact, Руководство пользователя и инструкция по установке

Страница: 9 / 26

UM-0100-03.09 – August 2010 4
3. Installation
Sitting the repeater
Fiplex repeaters are designed for outdoor usage. However, humidity and temperature changes may have
affect on the reliability. A preferable site for the repeater is thus indoor, in a tempered and ventilated room.
Repeaters are designed with a weather proof outdoor cabinet that can be mounted without any kind of
shelter from rain, snow or hail.
If a repeater is to be operated on the site when raining, snowing, or hailing there must be some kind of
permanent or temporary protection. This is applicable to gentle rainfall, snowfall or hail.
We extremely recommend not operating the repeater under very bad weather conditions, such as:
- Intense rainfall, snowfall or hail
- Storm or high wind
- Extremely low or high temperature
- High humidity of the air
Mounting
1. Mount the provided bracket
Normally, the repeater is mounted on a wall or pole. These mounting cases are shown below.
Figure 1
Figure 1 shows a bracket attachment to a wall using three fixing screws.
Figure 2
Figure 2 shows a bracket attachment to a pipe using two inox hose clamps (provided with bracket).