Fiplex TETRA Compact, Руководство пользователя и инструкция по установке

Страница: 18 / 26

UM-0100-03.09 – August 2010 13
Part 2 SOFTWARE
5. Installation
The following section will describe the steps to be followed in order to install and use the pFOMS software
with your Fiplex repeater.
1. Execute the Fiplex Portable Foms installer and choose the default path “C:\program files\fiplex”.
Please do not change this location.
2. Turn on the Repeater
BE SURE THAT “TO MOBILE” AND “TO BASE” PORTS ARE PROPERLY LOADED BE SURE THAT “TO MOBILE” AND “TO BASE” PORTS ARE PROPERLY LOADED BE SURE THAT “TO MOBILE” AND “TO BASE” PORTS ARE PROPERLY LOADED BE SURE THAT “TO MOBILE” AND “TO BASE” PORTS ARE PROPERLY LOADED
EITHER WITH 50 OHMS DUMMY LOADS EITHER WITH 50 OHMS DUMMY LOADS EITHER WITH 50 OHMS DUMMY LOADS EITHER WITH 50 OHMS DUMMY LOADS OR RADIATING SYSTEM. OR RADIATING SYSTEM. OR RADIATING SYSTEM. OR RADIATING SYSTEM.
3. Plug in USB cable to P50000 USB B male type connector. Repeater HW will trigger the installation of its
driver, which is a COM port emulator.
“New hardware found” advice should be noticed.