Fiorenzato | Cod. DISP_PRO_001 | Ed. 11/2020
23 / 24
Device
EN
Anomaly
Cause
Solution
Pressing the
or
buttons (on the
machine body of
the coffee grinder)
the coffee grinder
does not start the
grinding cycle.
The locking levers of
the removable chamber
are not completely
closed (the safety
microswitches inside the
machine body prevent
the motor from starting).
•
Fully close the locking levers of
the removable chamber.
The icon
appears on
the display
accompanied by
an Alert message
regarding the need
to replace the
grinders
The grinders are
reaching the ground
coffee limit set by
the manufacturer
and therefore their
replacement will need to
be planned.
•
It is possible to continue using
the coffee grinder until the set
weight (or time) limit is reached.
When the limit is reached, to
ensure maximum efficiency of
the machine, it is necessary to
replace the grinders following
the instructions provided in the
paragraph 3.1.2.
•
Once the replacement is
complete, command “Reset
Grinder” from the “SETTINGS”
menu.
The motor stops
during grinding.
Motor protection thermal
cut-out intervention
due to blocking of the
grinding system in the
presence of objects or
foreign bodies between
the grinders.
•
Turn off the appliance and wait
for it to cool completely.
•
Disconnect the appliance from
the power supply.
•
Close the shutter and remove
the bell.
•
Open the extractable chamber
and clean the grinders and
remove any foreign bodies.
•
Reassemble the appliance and
start a grinding cycle.
ATTENTION!
If the anomaly persists even after carrying out the suggested
corrective actions, or if functional anomalies not listed in the table occur,
contact a specialist technician and have the appliance checked.
