FIORENTINI S 150 Скачать руководство пользователя страница 10 | Manualshive

Страница: 10 / 54

FIORENTINI S 150 Скачать руководство пользователя страница 10

USE AND MAINTENANCE MANUAL

Road Sweeper S150

Page

10

of

54

1.10.

CLOTHING

This information must be strictly observed

.

The user can usefully complement the information provided by the manufacturer with additional
work instructions, obviously not in conflict with the contents of this User Manual, in order to

improve the safe use of the machine.

For example, it is important to pay attention to the clothing that anyone operating on the

machine wears.

-

Avoid using clothes with hooks that can remain attached to parts of the machine;

-

Avoid using ties and other loose clothing;

-

Avoid wearing bulky rings or bracelets that can entangle hands to machine components,

-

It is absolutely forbidden to use loafers, clogs, slippers, or other footwear that may affect
mobility and stability

-

Avoid using solvents, such as alcohol or petrol, as these may damage the surface;

-

Place the machine as specified at the time of the order according to the diagrams
provided by the manufacturer, otherwise the latter is not liable for any inconvenience.

1.11.

ECOLOGY AND POLLUTION

This information must be strictly observed.

Comply with the laws in force in the Country where the sweeper is operated regarding the use
and disposal of cleaning and maintenance products and also observe the recommendations

provided by such products manufacturers.

In the case of disposal comply with anti-pollution regulations laid down by the local regulatory
Authorities in the Country of use. If necessary, perform various internal legal procedures for the

disposal of machinery and/or its parts.

«
...
8
9
10
11
12
...
»

Содержание S 150























































Отзывы:

Нет отзывов