STARTING AND USE INSTRUCTIONS
PINKY 26
29
4.7.8 BRUSHES REPLACEMENT
Please follow the instructions below:
Remove the ignition key from the dashboard in order to avoid the accidental start of the
machine;
remove the yellow caps (see detail 1 in picture 4.11);
Remove the brushes turning them until you can see the pins, pull the pins and remove the
brushes, (see detail 2 in picture 4.11);
Set the new brush up: place it under the hexagonal support and press it up (see detail 3 in
picture 4.13);
After having replaced the brushes, the operator has to set the cases and the split pin up
again.
4.7.9 SQUEEGEE BLADES REPLACEMENT
Squeegee blades must be replaced when their hedges are worn. A perfect hedge allows a perfect
dry (picture 4.12).
Please follow these instructions to replace the squeegee blades:
Remove the squeegee from the machine and lay it on a table;
Turn the lever, unloose the steel strip and the two side wing nuts;
Remove the steel strips;
Do now the opposite operation, set the new blades up and regulate the squeegee;
Follow the same instructions to replace the front blade.
PICTURE N° 4.11
PICTURE N° 4.12
1- Squeegee front blade
2- Squeegee
3- Squeegee suction blade
5- Squeegee strap
6- Siphon
1
2
3
6
