SAFETY
I32NEW-I26NEW-I21NEW
Rev. 00 del 05/07/04
26/36
4.7.6 SQUEEGEE ADJUSTMENT
The squeegee has to be well regulated in order to have a perfect dry system. This kind of squeegee can
perfectly suck water, which flows into the suction pipe, but it must be parallel to the surface.
??
Remove the ignition key from the dashboard in order to avoid the casual starting of the machine.
??
By means of the bolts (see detail nr. 1 in picture nr. 4.11.) regulate the squeegee. The best squeegee
pressure is reached when the corner of its blade is in contact with the floor and their inclination is
between 45° and 60°.
??
Squeegee pressure regulation: the operator has to work on the squeegee driving wheels cam pins
(see detail nr. 1 in picture nr. 4.11.). The operator has to unloose the screw at the bottom of the pin
by means of the spanner delivered with the machine (picture 4.11.). Afterwards the operator has to
tighten this screw again.
Make sure that the two wheels of the squeegee are well regulated in order to keeps both its
blades parallel to the floor.
Picture 4.11
2
1
