6
TRANSPORT AND STORAGE
HANDLING THE PACKAGED MACHINE
The machine arrives in a special package, whose features are shown in fig. 2. A black arrow on the
packaging indicates the position of the centre of gravity; the transpallet or the forks of the forklift
truck must be positioned so the black arrow is in the centre of the forks.
The arrow indicated on the packaging is approximately in the centre of the forks themselves. The
packaging must be carefully handled. It is forbidden to stack packaging.
Fig. 2
UNPACKING THE MACHINE
1.
Cut the straps paying attention to any spring back
2.
Remove the staples on the cardboard base that join the cardboard to the pallet
3.
Remove the staples from the side and base of each panel in the case of plywood
4.
Cut the straps that prevent the machine from shifting
5.
Bring the machine to ground level
HANDLING THE UNPACKED MACHINE
1.
Check the machine and mount the batteries if not already installed
2.
To handle it for a short transport after use, disconnect the battery cables,
remove the brushes and the squeegee; for a longer transport, package the
machine inside its original box.
DESCRIPTION OF CONTROLS
