background image

 

14

 

 

 

SAFETY, MAINTENANCE AND INSPECTION 

 

 GENERAL SAFETY RULES                                                     

Before using the machine ,instruct all operators to read carefully the charter ”SAFETY 
STANDARDS “WARNING. 
 

 

The manufacturer can make any changes to the machine, for constructive or commercial 
reasons, without being obliged to change the instruction manual at the right time according to 
these modifications. 

 

The person responsible for the machine must adhere to CEE rules and to the local standards as 
well, regarding the working environment for operator’s safety and health purposes.  

 

Before starting the machine ,always perform the preliminarily checks. The safety standards 
which involve any dangers, mentioned in the manual text, can be recognized by the symbol: 
CAUTION. 

 

Beyond the standard listed hereunder, the person responsible for the machine must comply with 
the rules provided by the law in force regarding personnel’s safety and health in the working 
stations. Furthermore, the person responsible for the machine must instruct the operators on 
what follows:  

1.

 

Safety and accident prevention standards 

2.

 

Specific standards regarding the machines 

3.

 

Location on the machine of emergency pushbuttons or similar mechanism, for a 
prompt operation. The fixed or movable protections(carters)should always remain in 
their position, correctly fixed with perfect integrity during all procedures  regarding 
the normal operation. If, for any reason ,the carters are removed, their efficiency 
should be restored before restarting the machine. 

4.

 

Use the machine only under technically unexceptionable conditions and in 
compliance with its destination, by observing the safety and prevention standards 
according to the prescriptions contained in the instruction and maintenance 
handbook. 

5.

 

Remove (or let remove) immediately any failures which could compromise the 
safety. 

6.

 

The machine is designated to be used as a scrubber ;any other different use doesn’t 
not comply with its destination. the manufacturer/supplier takes no responsibility for 
any consequent damage. 

 

DANGER  
It is absolutely forbidden to suck inflammable and or toxic liquids and powders 

 

DANGER 
It is dangerous and absolutely forbidden to touch the lower part of the machine with the hands 
when some parts are moving. Should it be absolutely necessary, remove the main key from the 
control dashboard.

   

 

CAUTION 
On this rider on machine the rotating headlight should constantly operate and must be switched 
on when turning the key switch. 

 
CAUTION 
Keep in mind the following standards; failure to adhere to these rules can endanger the life of the 
operator or of other people. Always keep a sufficient distance from the sidewalk edges and from 
large differences in height of the floor where the machine can fall; never adopt a work tecnique that 

Содержание I-21PF



















Отзывы: