12
Fig.6
Fig.7
SQUEEGEE ADJUSTMENT
The squeegee must be perfectly adjusted to get a perfect floor drying ( fig. 8).
The main caracteristic of this type of squeegee is to pick-up the water from the floor and convey to
the vacuum hose, but it must be paralle to the floor.To rightly adjust the squeegee operate as follow:
•
Extract the key from the control dashboard to avoid accidental start of the machine.
•
To adjust the pression operate the screw nut: unscrewing if you desire to decrease the pression,
or screwing if you desire to increase the pression.
•
The right pressure is got when the edge of the rear blade touches the floor with a slating of
approx. 60°-45° referring to the floor. If it is necessary to change the blades slope, it is
necessary to operate the ring nuts.
Fig. 8
1.
Emergency stop switch;
2.
Advancement speed adjustment
throttle lever;
3.
Handle position adjustment
knob;
1.
Squeegee lifting pedal;
2.
Brushes lifting pedal;
1.
Squeegee inclination adjusting knob
2.
Squeegee pression adjusting knob