START-UP AND OPERATION INSTRUCTIONS
BIG 38/48
4.7.9 REPLACING THE SQUEEGEE BLADES
The squeegee blades (figure 4.14) must be replaced when the contact edge becomes abrasive: a perfect edge
is essential for efficient drying.
The following steps should be performed to replace the blades:
remove the squeegee from the machine by unscrewing the nuts securing it (detail 1) and place it on a
bench;
remove the knobs fixing the blades to the squeegee (detail 2);
take off the steel strips (detail 3) and remove the worn blades (detail 4);
insert the new blades and the strips;
tighten the knobs, replace the squeegee on the machine and then adjust it.
FIGURE 4.14
2 4 3
1
