EN
5
8. Dashboard
9. Fuel tank
10. Suction filter
11. Rigid suction pipe
12. Handle
13. Steering column unlock lever
14. Exhaust gas outlet
15. Water tank for dust removal
2.2 Identification Plate
An adhesive machine identification label
containing indelible “CE” marking details is
affixed on the outside of the bonnet.
The plate must never be removed and must
always be legible. If it should be damaged, another
must be requested. The appliance cannot be
marketed without the plate.
3 Before putting into Service
3.1 Unloading the appliance
3.2 Drive Disengaged
•
Open the cardboard box.
•
The machine is fixed to a wooden platform with
belts and with brackets to lock the wheels.
•
Cut the belts and remove the wheel brackets.
The machine can then be moved and pushed
off the platform.
•
The appliance can be handled in two ways:
with or without drive engaged.
Reach the hydraulic bypass valve through the
open bottom part of the bonnet. The valve is
located at the front of the machine. Operate the
lever.
This disengages the drive and the machine
is free to move.
Do not move the machine with drive disengaged
over long tracts and at speeds exceeding 6 km/h.
HAZARD
Risk of injury and damage.
Do not use a forklift truck to unload the
appliance. Proceed as follows.
HAZARD
Risk of injury and damage.
Before releasing the drive, keep the
appliance still so that it cannot move
accidentally.
HAZARD
HAZARD
