Fintek SANTIAGO, Инструкция по установке и эксплуатации

Страница: 32 / 48

3° INCLINATION
6
2.INSTALLATION ENGLISH
2.3 DRILLING THE WALL(P5)
Please note: If you are drilling the hole above
ground floor level, please ensure that an area
has been secured and while the holes are drilled
the outside area is supervised, until drilling has
been completed.
INTAKE AND OUTLET HOLES
- This operation should be carried out using the
proper tools(diamond tip or core borers drills with
high twisting torque and adjustable rotation speed).
- Fasten the template to the wall taking care to
check the distance from the floor and or ceiling and
keep it horizontal by using a spirit level.
- Use a pilot drill to mark the center of each core
hole to be drilled.
- Use a core boring head having a diameter of
162 mm to drill the two holes for intake and outlet
the air.
It is recommended that the holes must
have a slightly downward inclination of
3-5 degrees to prevent any back flow of water
from the pipes.
FRESH AIR HOLE
- For the fresh air hole, the diameter would be
52mm. It is optional for the customer.
P5
P13
DRAINAGE HOLE(P13)
This air conditioner has a double system to drain
the condensate moisture automatically.
Before install the Air Conditioner choose which
is the suitable system for your installation.
Please read carefully the follow instructions.
System “A”: drill a hole through the wall measur-
ing 30mm in diameter in the position shown in
the paper template. Drainage occurs by gravity.
For this reason, it is essential for the drain
line to have a minimum downward inclination
at least 3 degrees throughout its length
:
connect the drain pipe(from rubber terminal) to
the air conditioner (back side) after unplugged
the black rubber cup (see picture P13). With this
solution you can drain the condensate moisture
to a suitable place to do not cause any problems
to your neighbors.
If use system ”A”, please do not unplug the black
rubber cup from system “B”.
Outdoor
Indoor
A B
A
B
Soft terminal
Hard terminal
System “A” is more common use, and the
discharge pipe go outside where there is
no problem to connect or to discharge it,
this solution is OK for hot country and
normal cold temperature out side.
32 SANTIAGO