FINO FINOSINT KOMPAKT, Информация пользователя, Страница: 12 / 38

12
6. Installation
6.1 Installation location
The FINOSINT KOMPAKT High-Temperature Sinter Furnace is designed as a table-top unit. To ensure
stability, we recommend a level surface of at least 50 cm x 60 cm that can support a load of up to 60 kg.
Installation conditions
➤ Always install the sintering oven in dry rooms that are as dust-free as possible and make sure that liquids
cannot penetrate the unit.
➤
Highly inflammable and combustible gases and liquids must not be stored in the installation rooms.
➤ Do not place any combustible and inflammable objects near the sintering oven.
➤ Keep a distance of 50 mm around the sintering oven for sufficient cooling.
1. Align the supporting surface horizontally.
Lift and carry the sintering oven only at the unit base.
2. Place the sintering oven on the supporting surface.
Make sure the surface is non-slip.
CAUTION
Tipping loads!
Supporting surface with an insufficient load-bearing capacity.
➤ When installing the sintering oven, make sure that the supporting surface has
a sufficient load-bearing capacity.
CAUTION
Risk of injury due to oven weight!
Physical strain/back injuries due to the high inherent weight.
➤
Have at least two persons carry/move the sintering oven together (max. 30 kg
load bearing capacity/person).
CAUTION
Risk of overheating!
In the event of overheating, the electronic system will switch the heater off.
➤ Make sure that the air vents remain clear on all sides.