FINO 86000, Информация пользователя

Страница: 3 / 10

1. Fields of application
For optimum control over all laboratory work. The
adjustable magnification enables maximum micro-
metre (μm) precision. Fine-tuning of the objective
height using the round adjustment screws provided
on both sides.
2. Device setup
1 Ocular
2 Dioptre compensation
3 Clamping screw for microscope head
4 Objective tube
5 Drive knob for height adjustment
6 Drive box with stand compartment
7 Locking knob (for locking when using
the table stand)
8 Ocular viewfinders
9 Objectives
10 Episcopic illumination (ring light)
11 Plastic screws for episcopic illumination
(ring lights)
12 Socket for connecting the mains adapter cable
13 On/off switch for episcopic illumination
(ring light)
14 MAX-MIN control
15 Specimen stage
16 Clamping screw for specimen stage
17 Table stand
3. Safety precautions
Warning! Failure to observe this safety
information can result in electric shock! Keep
the device out of the reach of children.
• Only connect the episcopic illumination
(ring light) of the device to a properly
connected mains socket with a mains voltage of
230 V/50 Hz using the mains adapter supplied.
• Check the mains adapter, power cable and
device for damage prior to operation.
• If damage is identified, take the device
out of service and ensure that it cannot be put
back into operation. Have the device repaired
by an authorised specialist or by FINO GmbH.
• Do not open or repair the adapter housing,
otherwise safety is not ensured and the warranty
with become void.
• Protect the device against damp and
moisture.
• The mains adapter includes protection against
overheating and switches itself off automatically
after four hours of continuous operation. The
device must be allowed to stand for approx. one
hour before it may be switched on again.
3
ENU
It is essential to read the instructi-
ons for use carefully prior to ope-
ration and to keep these readily
available.
This symbol indicates safety pre-
cautions where non-compliance
can lead to risks for persons.
This symbol indicates safety pre-
cautions where non-compliance
can lead to damage of the device
and its function.