Finn BarkBlower BB-1208 MS, Руководство по эксплуатации и каталог запасных частей

Страница: 35 / 77

29
CHANGING THE MASTER SETTINGS
To change the master settings on your Bark Blower, you will need to press the button labeled
Master Settings, located in the MAIN menu screen (see Figure 14 below).
Once you have pressed the Master Settings button, you will be taken to the Pass Code screen
(see Figure). In order to access the Master Settings menu screen, you will have to enter a four
digit pass code. The four digit pass code is the number zero, plus the 3-digit serial number of your
Bark Blower. The serial number is located on the right-front of your Bark Blower on the serial num-
ber sticker. To enter the pass code please use the following steps (see Figure 15):
1. Press in on the control knob as this allows your to begin changing your pass code.
2. Press in on the control knob again to select the first number.
3. Once the first number is selected, make sure that number is zero.
4. Once you have confirmed that the first number of the pass code is zero, press in on the control
knob again, this will take you to the next number to be changed.
5. Turn the control knob to either the left or right to change the number.
6. Press in on the control knob once you have selected the correct number, and are ready to
move to the next.
7. Repeat steps 5 and 6 until you have all four numbers selected.
8. Once you have all four numbers selected, press in on the control knob again, in order to dese-
lect the pass code box.
9. Press the button labeled User Access to continue to the Master Settings screen (see Figure
15).
Figure 14
Figure 15