FINN & WINSTON FW811047, Руководство пользователя

Страница: 7 / 28

Installation
J 2
J 1
I 1
I 2
Before you begin,
measure the opening
to make sure your gate
is wide enough for the
entire opening. You could
adjust the dimension of
the gate with components
(I 1), (I 2), (J 1) and (J 2).
Cut the installation template following the dotted line.
Stick the longer one (G) in one side of wall and shorter one (H) to the directly
opposite wall.
The dotted line should be fully attached the floor and make sure the template
stand in vertical. Then mark the position of the holes.
7
G
H
28” - 48”
71 cm - 122cm