Finlux ST-55U01, Руководство пользователя

Страница: 23 / 103

English - 22 -
RDDIS
Disconnect a removable
device (as set by
RDCONN).
no parameter Disconnect a removable
device (as set by RDCONN)
GENERAL DISPLAY FUNCTIONS
Command Description Parameter Return
Led Turns the led on/off. integer n (0 = off, 1 = on)
Led is ON
or
Led is OFF
SETRC
Enables/disables remote
control commands.
string-integer n (n = ON, n
= OFF)
set remote state ON
or
set remote state OFF
irkey irkey KeyValue(HEX).
string-integer n (ex: irkey
0x38)
GenericIRKeySet key: n
SETSOURCE
Set source as enable/
disable.
string n, integer b (n =
SCART1, n = SCART2, n =
FAV, n = SVHS, n = HDMI1,
n = HDMI2, n = HDMI3,
n = HDMI4, n
= YPBPR, n = VGA, n =
SCART1S, n = SCART2S) (b
= 1(enable), b = 0(disable))
#*Selected source n
#*Enable/Disable state : b
GETSOURCE Gets source. no parameter #*source is ...
CHILDLOCK Set child lock mode. integer n (0 = off, 1 = on) #*set child lock state to n
AUTOTVOFF Set auto tv off level. integer n (0 = off, 1 = on)
#*set auto tv off mode to ON
or
#*set auto tv off mode to OFF
GETCOUNTRY
Get country in channels
state.
no parameter #*COUNTRY IS : ...
GETCURRENTA-
NALOGTVSYSTEM
Get current analog tv
system value.
no parameter #*CURRENT TV SYSTEM : ...
GETSWVERSION
Returns the software
version of tv.
no parameter #*V...
BUILDINFO Reports the build info. no parameter #*Build info = ... Revision = ...
FACTORY
Load factory settings to
NVRAM.
no parameter
#*Factory Settings were loaded to
NVRAM.
KEY Send key to Eclipse.
string-integer n (n = 0, n = 1,
......, n = up, ......, n = menu,
.....ext.)
n key send to Eclipse
RESET Reset the box. no parameter
Reset process was successfully
accomplished. You need to
establish the connection again.
KEYstandby
Switch box to Standby
mode. ( For quick
standby)
no parameter standby key send to Eclipse