Finlux 48FT3E242S-T, Руководство пользователя

Страница: 30 / 37

English - 29 -
the glasses before using to view 3D, as to prevent
interference from other Bluetooth devices. After
pairing the glasses will only work with the TV they
are paired to. There is no need to repeat this process
once successful pairing is complete unless you wish
to use with another TV.
To pair the glasses and TV:
1. Ensure TV is in 3D mode and glasses are within
0.5M of the TV.
2. In power on or power off state, press the power
button for 3 seconds. The LED light will flash
green and red alternately whilst pairing is in
progess. Pairing success is indicated by the 3D
glasses shutters operating normally and the 3D
content can be viewed.
3. If the glasses cannot successfully pair with the
TV, the LED light will illuminate orange. If this is
the case, repeat steps 1 and 2 above.
Replacement of battery
• Push the spring clasp to the left, at the same time
move the battery lid up as indicated in picture 1.
• Pull the battery lid up. Install or replace the battery
as indicated in picture 2 observing correct polarity.
• Close the battery lid as shown in picture 3.
-
+
-
picture 1 picture 2 picture 3
Operation Instruction and Function of
Power LED Light
Power on
• Ensure TV is in 3D mode
• Press the power button on the glasses
• The LED light will flash green. Glasses are now in
ON state
Power off
• Press the power button on the glasses
• The LED light will flash red. Glasses are now in
OFF state
Automatic Power off
If the glasses do not receive a Bluetooth signal
from the TV within 10 seconds, the glasses will
automatically shutdown.
Low battery power
If the battery power is low, the LED light will flash
every 2 seconds and/or the glasses shutter will
work abnormally. In this case replace the battery as
indicated in the above section.
To ensure better 3D vision experience, please
watch within the suggested viewing range (Pairing
range ≤0.5M).
Horizontal
view
View Range1-10m
If you tilt your head when watching with 3D glasses, it
will affect the picture in a negative way. At 90°C Head
Tilt the screen will turn to black and 3D watching is
not possible. For best viewing watch 3D images with
no Head Tilt (0 degrees).
Standard Specification
3D method: Liquid Crystal Shutter
Dimensions Width: 156 mm
Height: 41 mm
Depth: 168 mm
Operating temperature: 0°C - 50°C
Weight (including battery): 28g ± 2g
Material Frame: Resin
Lens: Liquid crystal glass
Battery: CR2025; Battery life: 80hr +/- 5hr
The battery operating time may become shorter
depending on the
usage condition or environment.
Pairing range: < 0.5 m
Viewing range: 1-10 m
The specification may change without notice.
Licence information
The Bluetooth
®
word, mark and logos are registered
trademarks owned by Bluetooth SIG, Inc. and any use
of such marks is under license. Other trademarks and
trade names are those of their respective owners.
Information for Users on Disposal of Old
Equipment and Batteries
These symbols indicate that equipment with these
symbols should not be disposed of as general
household waste. If you want to dispose of the
product or battery, please consider the collection
systems or facilities for appropriate recycling.
Notice: “Pb” sign will occur below the crossed-out wheelie bin
symbol if the battery contains lead.
Products
Battery