English
- 24 -
By pressing
or
button, set the
Language
item. Press
or
button to highlight
Country
item and then use
or
to set. Afterwards, by
pressing
or
button, highlight
Text
Language
and use
or
to set. When
finished, press
OK
button to continue:
APS is running...
Cancel
After APS is finalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers
and names assigned to the programmes.
If you do not accept the locations and/or the
programme names, you can change them via
Program Table
. See “Install Menu” section.
All channels found are stored in a sorted form
with respect to their channel numbers. Some
services may not appear with the correct
channel number. This is because some
broadcasters have no channel number
information.
Manual Search
In
Manual Search
, the number of the multiplex
is entered manually and only that multiplex is
searched for the channels. For every valid
channel number, signal level, signal quality
and network name are shown at the bottom
of the screen.
In both manual and auto search any existing
channel in the database is not re-stored to
avoid redundant duplicates of that channel.
First Time Installation
The user can use this item to load default
settings, which were loaded to the receiver at
the factory.
To install factory settings, highlight
“First Time
Installation”
menu item and press
OK
button,
then you will be asked whether or not to delete
the settings. Selecting “
Yes
” by pressing
OK
button while the “
Yes
” is highlighted will delete
the existing channel table.
Are you sure you want to delete all channels and
settings for first time installation?
Yes
No
After factory settings are loaded, “
First Time
Installation
” menu will be displayed.
The menu which is displayed for language
selection appears on the screen at first. By
using
or
buttons, select the desired
language option, and press
OK
button to
activate.
After the language is selected, a message asking
for automatic search appears on the screen:
Do you want to start automatic search?
Yes
No
Highlight “Yes” item by pressing
or
buttons
and press
OK
button to start installation. After
search is completed for digital channels, a
message asking whether to search for
analogue channels appears on the screen:
Yes
Do you want to search for
analogue channels?
No
Highlight “
Yes
” item by pressing
or
buttons
and press
OK
button to search for analogue
channels. The following menu appears on
the screen for analogue channel search:
A01-ENG-37760W-1110UK-37 INCH TFT 17MB26 PEU IDTV-(ECO PIP-SRS-WO SVHS-OAD)-50116145.p65
27.09.2007, 16:46
24
