Finlux 24FLHYR910LVHU, Руководство пользователя

Страница: 59 / 86

English - 58 -
progress bar will move along. Press “MENU” button
to cancel process. In such a case, located channels
are not stored.
Manual Tuning
HINT: This feature can be used for direct broadcast
entry.
Select • Manual Channel Scan from the Installation
menu by using “ ”/“ ” and OK buttons. Manual
Scan options screen will be displayed.
Select the desired
• Search Type using “ ” or
“ ” button. Manual search options will change
accordingly. Use “ ”/“ ” button to highlight an item
and then press “ ” or “ ” button to set an option.
You can press
“MENU” button to cancel.
Digital Aerial Manual Search
In manual channel scan, the number of the multiplex
or frequency are entered manually and only that
multiplex or frequency are searched for the channels.
After selecting search type as
Digital , you can enter
the multiplex or frequency number using the numeric
buttons and press
OK button to search.
Digital Cable Manual Search
In cable manual scan, you can enter frequency,
modulation, symbol rate and network channel scan
options. After selecting search type as Digital Cable,
you can set the desired options and press OK button
to search.
Analogue Manual Search
After selecting search type as analogue, you can use
“ ”/“ ” button to highlight an item and then press
“ ” or “ ” button to set an option.
Enter the channel number or frequency using the
numeric buttons. You can then press
OK button
to search. When the channel is located, any new
channels that are not on the list will be stored.
Analogue Fine Tune
Select • Analogue Fine Tune from the Installation
menu by using “ ” or “ ” and OK buttons. Analogue
fi ne tune screen will be displayed. Analogue Fine
Tune feature will not be available if there are no
analog channels, digital channels and external
sources stored.
Press
• OK button to proceed. Use “ ” or “ ” button
to set Fine Tune. When fi nished, press OK button
again.
Network Channel Scan
Select Network Channel Scan from the installation
menu by using “ ” or “ ” and OK buttons. Network
Channel Scan selection screen will be displayed. Select
Digital Aerial or Digital Cable and press OK button to
continue. The following message will be asked. Select
Yes to continue or select No to cancel.
If you start Digital Aerial scan process, automatic
scanning will start. You can press
“MENU” button
to cancel.
If you start Digital Cable scan process, the following
screen will be displayed.
02_MB60_[GB]_5110UK_PVR_DVB-TC_BRONZE17_woypbpr_224910LED_10077018_50208743.indd 58 02_MB60_[GB]_5110UK_PVR_DVB-TC_BRONZE17_woypbpr_224910LED_10077018_50208743.indd 58 06.01.2012 15:10:54 06.01.2012 15:10:54