- 7 -
TV and Operating Buttons
FRONT and REAR VIEW
Control switch VIEW
Control Switch
Up direction
1.
Down direction
2.
Programme/Volume / AV /
3.
Standby-On selection switch
Note: You can move the switch,
upward or downward to change
the volume. If you want to change
the channel, press the middle of
the switch once (Position 3) and
then move upward or downward. If
you press the middle of the switch
once more, the source OSD will
be displayed. To select desired
source, move the switch upward or
downward and release. If you press
the middle of the switch and hold for
a few seconds, the TV will switch
to standby mode. The Main menu
OSD cannot be displayed via the
control buttons on the TV.
Viewing the Connections - Back Connectors
SPDIF
SCART
VGA
Coax.OUT
HDMI 2: HDMI Input
1.
HDMI 1: HDMI Input
2.
HDMI Inputs
are for connecting a device that has a HDMI socket. Your TV is capable of displaying high
definition pictures from devices such as a High Definition Satellite Receiver or Blu-ray Player. Please
see Appendix B for further details.
RF Input
3.
connects to an aerial antenna system.
Note:
If you use a decoder or a media recorder, you should connect the aerial cable through the device to
the television with an appropriate antenna cable, as shown in the illustration in the following pages.
SCART
4.
input or output for external devices. Connect the SCART cable between the SCART socket on the
TV and the SCART socket on your external device (such as a decoder, a VCR or a DVD player).
Note:
If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.
Note
:
S-VHS signal is supported via the scart socket(optional).
