FineTek JTR, Инструкция по эксплуатации, Страница: 27 / 39

27
Setting 1.5
Application
Probe length
Adjustment L.V.
Filter Level
Filter Level 1.5.1
0%
Filter Wave Setting (1.5) menu is used to adjust the filter wave degree of the output signal
within 0%~100%, which is applied in fluctuating level. Note that the higher the percentage
of the filter wave, the slower the output reaction time is.
Setting 1.6
Application
Adjustment L.V.
Filter Level
Current Set
Current Set 1.6.1
1st Current Set
2nd Current Set
1st Current Set
4~20mA
20~4mA
Current Settings (1.6) menu can be divided into 1st current set and 2nd current set. Wherein,
the 2nd current set is only available for the models with dual-analog output. In this setting,
the user may set the current output to correspond to the distance or the material height, with
an output conversion of 4~20mA and 20~4mA.
9.2.2 Display settings Menu
Display 2.1
Language
Indication 1st
Indication 2nd
Lcd Contrast
Display Settings (2) menu provides 4 items for setting, with the functions as introduced below:
Language (2.1): It is to set the language shown on the LCM display.
Indication 1st (2.2): It is to set the display content shown on the upper part of the LCM
display.
Indication 2nd (2.3):It is to set the display content shown on the lower part of the LCM
display.
LCM Contrast (2.4): It is to set the display contrast shown on the LCM display.