7
Tap can be installed either attached to a wall (Fig.1) or on a counter-
top (Fig. 2)
Fitting types:
The two types of fitting used in this installation are
Quick-connect (push-fit) and JACO fitting.
1. Quick-Connect (QC) fitting:
How to connect
– See Fig. 3. Remove collet clip, insert tubing
into fitting until it locks. Gently pull tubing back to ensure fit is
secure. Re-place collet clip.
How to disconnect
– See Fig. 4. Remove collet clip, push
down on collet so it is completely flush with the fitting and pull
tubing simultaneously.
2. JACO Fitting: See Fig. 5. Slide compression (hexagon) nut
onto tubing, insert tube plug into tubing. Insert tubing into the
opening of fitting and screw on the compression nut tightly.
