Finelite Direct Curved HP-4, Руководство по установке

Страница: 12 / 12

© 2019 FINELITE, INC. ALL RIGHTS RESERVED. Form - 98571. EFFECTIVE DA
TE: 12/03/19
HP-4 Direct Curved Installation Instructions
12 of 12
B. Replace Backplates C. Replace Diffusers
•
CAUTION: Be careful when replacing backplates. There may be preinstalled double diffusers
that should stay in place.
•
Reinstall curved backplates by pushing up into luminaire body and snapping back into clips.
•
CAUTION: Be careful when replacing backplates. There may be preinstalled double diffusers
that should stay in place.
•
Reinstall straight backplates by rotating into luminaire body and snapping back into clips.
Step 7 - Closing Luminaires
Curved Straight
Double Diffuser
(Do NOT Remove)
Backplate
Safety Cable
Backplate
Double Diffuser
(Do NOT Remove)
•
NOTE (STRAIGHT LUMINAIRE ONLY): If your installation includes a battery backup, please
see addendum (98333) that should be included with your kitting package.
•
FOR SENSOR (STRAIGHT LUMINAIRE ONLY): If luminaire contains a sensor at joint, refer
to page 5 of Sensor Addendum before Closing Luminaires.
•
CAUTION: Wear gloves to keep diffuser surface clean.
•
CRITICAL: Be sure to install correct diffuser to its corresponding luminaire ID.
•
Carefully remove diffusers from protective plastic bag.
•
Install diffusers by snapping into place.
•
Turn power on to luminaire.
Diffuser
Bottom-Up View Bottom-Up View
CAUTION
Be careful when replacing backplates.
There may be preinstalled double
diffusers that should stay in place.
CAUTION
Be careful when replacing backplates.
There may be preinstalled double
diffusers that should stay in place.