JOINER Fixture
STARTER
Fixture
STARTER
Fixture
JOINER Fixture
FINELITE
Series 10 WM Joining Instructions
Finelite, Inc.
◊
30500 Whipple Road
◊
Union City, CA 94587-1530
◊
510 / 441-1100
◊
FAX: 510 / 441-1510
◊
www.finelite.com
98030.08/01
STEP 1. Follow Finelite
instructions to install STARTER
fixture.
STEP 2. Hold JOINER fixture up
to wall. Connect plug-together
wiring.
STEP 3. Slide JOINER into
STARTER fixture.
STEP 4. Secure fixtures together
with two joiner 10/32 screws
(provided) to complete
connection. FIGURE B.
STEP 5. Secure JOINER fixture
to wall studs as described in
installation instructions.
FINAL CHECK-FIGURE B.
• Plug together wiring is
connected.
• Two 10/32 screws have been
installed between fixtures.
Repeat for remaining JOINER and
ENDER fixtures to complete row.
STEP 1. Follow Finelite instructions to
install Mounting Bracket and STARTER.
STEP 2. Hold JOINER fixture up to wall.
Raise JOINER slightly above Mounting
Bracket and holding fixture parallel to wall,
slide fixture straight down to engage top
and bottom edges in mounting bracket.
FIGURE A.
STEP 3. Connect plug-together wiring. Slide
JOINER into STARTER fixture.
STEP 4. Secure fixtures together with two
joiner 10/32 screws (provided) to complete
connection. FIGURE B.
STEP 5. Insert one 8/32 rack adjustment
screw (provided) on each side of joint and
thread into Mounting Bracket. Tighten
/loosen to level fixture. FIGURE C.
FINAL CHECK-FIGURE C.
• Plug together wiring is connected.
• Two 10/32 screws have been installed
between fixtures.
• Top and bottom of fixture and Mounting
Bracket are correctly engaged. Rack
adjustment 8/32 screws (inside) are secure.
Repeat for remaining JOINER and ENDER
fixtures to complete row.
DO NOT ATTEMPT TO JOIN FIXTURES TOGETHER ON THE FLOOR. DAMAGE MAY RESULT WHEN LIFTED.
FOLLOW THESE INSTRUCTIONS.
FIGURE A.
FIGURE B.
T
E
K
C
A
R
B
G
N
I
T
N
U
O
M
T
N
U
O
M
E
C
A
F
R
U
S
plug together wiring
Push interlocking joiners
together. Secure with 10/32
joiner screws.
Joint secured with 10/32
joiner screws (provided).
STARTER
Fixture
JOINER
Fixture
JOINER
Fixture
STARTER
Fixture
STARTER
Fixture
JOINER Fixture
Push Joiner parallel to wall then down to catch top
and bottom of fixture into wall bracket.
Slide
plug together wiring
Joint secured with 10/32
joiner screws (provided).
Fixture must be
secure on top and
bottom of wall
Mounting Bracket
Rack adjustment 8/32 screws (inside) for leveling.
Mounting
Bracket
wall
wall
Fixture
FIGURE A.
FIGURE B.
FIGURE C.