Read the Label
Fo
rm
98
06
6.1
/0
5
Sid
e
2
Look for the labels — you need them to install your job correctly.
Job Name
Fixture Type and Run Length
Unique Fixture
ID Number
Full Catalog Order ID
STARTER, JOINER, or ENDER
S5-20
STARTER
ID: 1
S5-P-20-2T8-00000-EP-277-SC-MOT-FE-FW-00-00
ABC Corporation - A12495
Factory Order Number
UC
1. Identify all fixtures. Look for labels
located:
2 labels - 1 at each end of box (or bag)
1 label - box top (or bag top)
1 on fixture (permanent)
2. Keep plastic bags ON for protection. T8
lamps may be turned on with the bags on.
T5 and T5-HO lamps get too hot - remove
bags before turning lamps on.
3. Lay out fixtures starting with ID: 1, then
ID: 2, etc.
4. Hang STARTER fixture ID: 1. Secure both
ends to mounting aircraft cable and level.
5. Hang far end of JOINER ID: 2 while
supporting both ends.
6. Join ID: 1 and ID: 2 by attaching plug
together wiring, screwing fixtures together.
NOTE: See additional mounting and joining
instructions for each Finelite Series.
Hang fixtures in ID order. Hang prior to joining.
Hang, Level, Join, repeat to the end of the run.
HANG PRIOR TO JOINING
STARTER ID:1
JOINER ID:2
JOINER ID:3
JOINER ID:4
ENDER ID:5
FINELITE
Finelite, Inc. • 30500 Whipple Road • Union City, CA 94587-1530 • 510 / 441-1100 • FAX: 510 / 441-1510 • www.finelite.com
