12) Can receive up to 3 sensors
13) Wall hanging or free standing
14) Included one transmitter
15) Synchronized instant reception
16) Low battery indicator on the receiver
2. Installation
2.1 Installing the Batteries
1) Insert two AAA batteries into the remote sensor. After the remote sensor is
powered up, the sensor will transmit weather data every 8s for 8 times. After
this learning period is over, then the transmitter will transmit every 48s.
2) Insert two AA batteries into the weather station. When the base station is
powered up, a short beep will sound and all LCD segments will light up for
about 4 seconds before it enters into learning mode to learn the sensors
security code.
Every time the remote sensor is powered up (for example after a
change of batteries), a random security code is transmitted and this code must
be synchronized with the base station to receive weather data.
3) Wait 3 minutes or until the outdoor temperature is displayed in the weather
station.
Do not press any keys before outdoor sensor data received.
The
wireless weather station can receive up to 3 temperature sensors. If you have
purchased additional remote sensors, repeat step 1) for all extra sensors.
However, ensure that you leave 10 seconds in between the reception of the
last sensor and the set-up of the following sensor. The wireless weather station
will number the sensors in the order of set-up, i.e. the first temperature sensor
will have the temperature displayed with
1.
4) After the learning mode, the base station will start the radio controlled time
Note
: Please note the polarity when inserting/replacing batteries in the unit,
failure to do so may result in permanent damage. Use good quality Alkaline
Batteries and avoid rechargeable batteries.
- 3 -
