Fine Offset Electronics WH1081PC, Руководство по эксплуатации

Страница: 12 / 14

- 12 -
of power supply.
In case the memory capacity of the Weather Station is exhausted the oldest data sets
stored will be overwritten by the new ones entered.
Data Recall
Certain weather data or setting values can only be read out, processed, and displayed by means of a PC.
Also the settings of the storing intervals from 5 minutes to 240 minutes for the storage of data sets can only
be performed by means of a PC.
Connections and Software
The wiring between Weather Station and PC takes place by means of an included USB cable. The
EasyWeather software package, also included in the shipping contents, must be installed on the PC.
This software allows the display of all present weather data with graphic symbols. It also allows the display,
storage, and printing of history data sets, whose volume exceeding the maximum 4080 data sets of the
Weather Station is only limited by the capacity of the PC’s main memory.
PC software installation
The installation of WH1081PC software is very simple: double click the setup.exe file and follow the steps
popped up.
Make sure you are running the program under the administrator accounts of your windows PC platform.
Otherwise the graphic function might not be working when graph display mode is needed to display all history
data.
If you run the program for the first time, the current weather display will be displayed and at the sub line of the
window, the program will show related information regarding the read of all history data into the PC. Please
note however, when there is large amount of data is being uploaded, it will take a few minutes time before the
system can respond to your setup settings. Otherwise it will display “read weather data fail” error message
since the USB port is reading the data from the memory and the system is not able to respond any further job
tasks.