finder 1C.81, Руководство пользователя

Страница: 34 / 40

32
SUPERVISOR FUNCTION
With the unit OFF, press and hold in the centre of the display for a few seconds
to access the “SUPERVISOR” configuration function. This function is used to
set the maximum and minimum temperatures usable for different seasons,
in both heating and air conditioning modes.
Setting the “SUPERVISOR” lock PIN makes it no longer possible to select
Summer and Winter modes in the advanced menu, and impedes
access to the calibration function.
The access code is NOT requested when the supervisor setup function is
accessed for the first time.
If a PIN (other than “000”) is configured, the system requests the code to
allow access.
If the wrong code is entered, the message ERR is displayed for a few seconds
and the unit switches OFF again.
After three failed unlock attempts, no further PIN entry attempts may be
made for 20 seconds.
The message Err remains on the display.
IMPORTANT
If lost, the PIN code CANNOT be recovered or reset, even by resetting
the thermostat.
It is strongly advisable to write the access code down and keep it in a
safe place.
NOTE
Using the RESET function with SUPERVISOR PIN number = 000 restores ALL
factory settings, including the maximum and minimum temperature values
configured with the SUPERVISOR function.
Using a SUPERVISOR PIN number other than zero resets ALL settings except
for the values configured with the SUPERVISOR function.