finder 1C.81, Руководство пользователя

Страница: 31 / 40

29
7 - ENERGY SAVING E1
When the Energy Saving E1(ECO1) function is active, the thermostat
automatically optimises the operation of the system - specifically, using an
internal mathematical algorithm to compensate for inertia and adjust
activation intervals and temperature settings appropriately to improve
perceived comfort. This function also significantly reduces energy
consumption. Once in the advanced menu, press
OK
repeatedly to reach
the E1 function. Use the and buttons to select the following values
as desired.
E1 = 0 Function off
E1 = 1 Function on
E1 = 2 Function on if heating system is equipped with zone selector
valves with opening times greater than 10 seconds and less than
90 seconds
NOTE
This function is not recommended for forced ventilation heating systems
(e.g. fan coil).
8
-
ENERGY SAVING E2
With the Energy Saving E2 (ECO2) function active, the thermostat determines
how long it takes the ambient air to reach the desired temperature.
This entirely automatic function adjusts the activation intervals, anticipating
and shortening activation times as necessary to save energy.
If activation times were set manually, in some cases it may be necessary to
anticipate/shorten activation times significantly to reach the desired
temperature at the desired time.
This function also takes the season, insulation and heat losses into account,
adjusting and shortening activation times accordingly. Example. If it takes
1.5 hours to increase the temperature by 4°C in January but only 40 minutes
in March, the ECO2 function will take this time into account.
ENERGY SAVING