Fimet F1, Руководство пользователя

Страница: 44 / 59

44 • User Guide
The maximum allowed oxygen level during use is 25%. The system is not designed to be
operated in oxygen-rich environments.
4.3 Manufacturer’s Guarantee
The product comes with a 24-month manufacturer's guarantee starting from the day of
purchase.
The product must be registered to Fimet Oy. Registration can be done on Fimet’s website
(www.fimet.fi) or by filling and returning a correctly filled Registration Form to Fimet. The
registration instructions and the registration form are inside the unit manual folder. Guar-
antee is only valid after successful registration. The end user is responsible for completing
registration.
The product must be maintained according to the instructions in section
4.5 Maintenance .
Third party devices (like instruments and separation systems) are guaranteed by their
manufacturer and thus excluded from Fimet Oy’s guarantee. Fimet Oy will take care of re-
placement of faulty device with the manufacturer, if the device was bought from Fimet Oy.
Manufacturer’s guarantee covers the parts to be replaced, but not the installation work.
The guarantee time of the replaced parts is limited to the guarantee period of the product.
Manufacturer’s guarantee does not cover defects caused by the following:

normal wear and tear

improper installation, maintenance, repair, care, use, or service of the device, or part
of it

using non-compliant parts, for example instruments without CE-mark

mains power surges, shortages or outages (such as lightning discharges)

external causes (for example fires, floods, or vandalism).
The manufacturer or the vendor is not responsible for any damage caused by user failing
to react to error notifications.
4.4 Installation and Service
Warning!
To avoid the risk of electric shock, this equipment must only be connected to
supply mains with protective earth.
The installation procedure is described in the F1 Technical Manual.
For the warranty to be valid:

Installation and service must be carried out by a service provider authorized by Fimet
Oy.

The safety of the product has to be evaluated after repairs and any modifications ac-
cording to EN ISO 60601-1:2006.
The product must be serviced according to the schedule defined in section 3.9 Annual
Service Operations
4.5 Maintenance
Read the section 3 Maintenance to ensure the safe use of the device.