Fimet F1 Скачать руководство пользователя страница 24

Страница: 24 / 59

24 • User Guide

To add water, de-pressurize the bottle by turning the lever to the off-position. The bottle

can then be detached safely by rotating it counter clockwise. Do not overfill the bottle;

leave at least 2 cm free space on the top.
When starting to use the clean water bottle after main water line use, ensure the cleanli-

ness of the water hoses by allowing the water run for a couple of seconds through every

instrument, cup filling tap, and cuspidor bowl flushing tap.

2.8.5

Disinfecting the Water System

The clean water bottle can be used to disinfect the instrument hoses and the water tubing.

See section

3.1

Cleaning, Disinfecting for more information.

2.8.6

Daily Use of Mild Disinfecting Solutions

Mild disinfecting solutions can be used to prevent contamination coming from main water

line and build-up of microfilm. These liquids may be added to the clean water bottle in the

right proportion. Please read the manufacturer’s instructions for correct usage.

2.9

Connection Box

Warning!

The maximum connection voltage to the relays for the external devices is 24 V.

The

Connection Box

consists of a power supply and connections to drainage, air, mains

power, and main water line. The main fuse, the main power switch, and the relays for ex-

ternal devices are also in the connection box.

Connection Box

is connected to the unit

with flexible hoses and electric cables.

2.9.1

Switching the Device’s Power on and off

Warning!

There are harmful voltage levels, pressurized air, and water inside the connection

box. Only authorized maintenance staff may open the connection box.

Note!

When the device is switched on, there are pressurized air and water in the

instrument

bridge

, the

suction

head

, the

cuspidor

, and the

connection

box

Содержание F1




























































Результаты поиска

Содержание F1

Отзывы:

Бренды по названию

Популярные бренды

Fimet F1, Руководство пользователя

Результаты поиска

Содержание F1

Отзывы:

Бренды по названию

Популярные бренды