Fimar TS1, Использование и обслуживание

Страница: 33 / 154

- 11 - English language
346-
075-0.
fm
ID
M
HEAT SEALERS
TS - TSA
EN
ADJUSTING THE CONTAINER SUPPORT
1. Pull out the container support (C) com-
pletely.
2. Adjust the support (R) according to the for-
mat of interest (See "Description of contai-
ner combination").
USE INSTRUCTIONS
If it is the first time the appliance is used, remove any protective linings and accu-
rately clean to remove any construction material residue before starting it.
Model TS1 - TS2
1. Press the main switch (A1) to turn on the appliance.
2. Select the work program of interest (See "Instructions for use").
3. Wait about 10 minutes for the appliance to reach the correct operating temperature.
4. Put the container filled with product on the support
(C) .
5. Push the support (C) completely into the appliance.
6. Lower the lever (D) to activate sealing, only when the support is completely inserted in
the appliance.
Important
DO NOT lower the lever if the support is without the container or if it is not completely
inserted, to prevent damaging the appliance components irreparably.
The light (A6) switches off when sealing is complete.
7. Lift the lever (D) .
8. Pull out the support (C) and remove the container.
Caution - Precaution
To remove the container wear latex gloves to prevent getting burnt.
Model TSA1 - TSA2 - TSA3
1. Press the main switch (A1) to turn on the appliance.
2. Select the work program of interest (See "Instructions for use").