Page 13
PREPARING THE MACHINE
12. FIXING THE FRONT SQUEEGEE KIT (OPTIONAL) FV80
Proceed as follows to fix the squeegee kit at the front of the machine:
1.
Make sure the machine is in a safe condition (read “
MACHINE SAFETY
”).
ATTENTION: you are advised to always wear protective gloves, to avoid the risk of
serious injury to your hands.
2.
Free the vacuum head from the collection tank by releasing the hooks (1) on the side of the tank. Rotate
the levers as shown by the arrow in the picture on the right.
3.
Use the handle (2) on the vacuum head unit to remove it from the collection tank.
4.
Rest the head carefully on the ground.
5.
Using the handle, rotate the collection tank until the handle is touching the ground.
6.
Take hold of the front squeegee support (3).
