19
3
4
100-120 B-D-Bifuel
3
4
6
100-120 B-D-Bifuel
8
7
80-90-110-100-120 B-D-Bifuel
80-90-110 B-D
6
Bifuel versions:
7 Install the LPG cylinder following the instructions supplied.
Refill the tank with unleaded petrol (capacity 10 l)
8 To start with cold machine, use the starter and leave it
engaged for the necessary time.
ATTENTION:
ask qualified personnel to check LPG
cylinder installation and its correct operation as well as
connections integrity.
ATTENTION:
Bifuel version can work with unleaded
petrol as well as with LPG.
Select the desired fuel with the selector (see diesel-
Bifuel versions tools page)
B-D-Bifuel versions:
9 In the working place activate the lever upwards to lower the
central brush (3) and the right side brush (4).
If the left side brush is present, activate the specific lever.
10 the machine works in normal conditions with the hatch
open, as the dirt is collected by the central brush and
pushed into the debris hopper.
Check the hopper is lowered. Using the hatch lever to
lower it, the green LED lights up on the instrument panel,
showing the hopper is open and therefore allowing the dirt
to be collected.
11 Activate the intake turbine by the specific command (6),
do not use the suction system if you are working on wet
surfaces.
12 press the double pedal to activate the traction and impose a
suitable machine speed for the quantity of dust and debris
on the floor. To move forwards, press the right side of the
pedal (7); to move backwards, press the left side (8).
13 If the machine needs to be transferred without functioning,
you are advised to raise the brushes.
Respect the warnings indicated in the engine
maintenance and use manual for the start-up operations
(engine ignition).
ATTENTION:
the machine is fitted with a dead man's
micro-switch beneath the seat; this prevents the
machine from moving if the operator is not correctly
seated.
ATTENTION:
avoid prolonged use of the filter shaker
motor. Shut off the suction function by means of the
hatch lever when you are about to clean wet or damp
surfaces, to avoid ruining the filter.
INITIAL START-UP AND USE OF THE MACHINE
