8
MACHINE PREPARATION
4.
Man present push-button
6.
STEERING COLUMN COMPONENTS
The handlebar column components are identified as follows:
1.
Cable wrap bracket - solution tank support bracket (optional)
7.
HANDLEBAR ADJUSTMENT – WORK POSITION
Before you start working with the machine, you will need to find the correct work position. To do this, press
the tilt adjustment lever, release it until your arms are slightly bent and as low as possible, while keeping
the back straight and the legs slightly apart.
When working the operator is behind the machine.
8. SOLUTION TANK (OPTIONAL)
To insert the solution tank onto the handlebars, proceed as follows:
1.
Secure the handlebars in a position of about 45° to the ground
2.
By loosening the closing knob (1), position the top brackets above half of the column (if these are not
already positioned)
3.
Put the solution tank on the column, so that the bottom of the tank is anchored to the fixed bracket (2)
on the column
4.
While keeping the tank with one hand, move the mobile bracket (3) down until the solution tank is
locked to the column
5.
Lock the position of the mobile bracket (3) by acting on the closing knob (1)
1
1
4
1
2
3