FIM Flexy Twin, Инструкция по сборке и эксплуатации

Страница: 11 / 11

FIM Flexy Panel Fastening Instructions
In order to make the Flexy Panels easier to install, with a cleaner look, we have updated
the process to fasten the panels into the track.
Slide the panel into the tracks on the
bottom of the support arms, making sure
the white welt strip is facing up to the top
of the awning, which is the rounded side of
the support arm
Position the panel so the finished edge of
the fabric is flush with the end of the
support arm, and grab one of the included
fastening screws
Start the screw so it will pinch the welt
cord in the track, making sure you do not
push back the panel in the process. Note
that the screw needs to start in the small
gap between the welt and the aluminum
groove
Turn in the screw carefully – it will grab
both the welt and the aluminum and lock
the panel firmly in position
The finished look from top. Note the screw
head is cleanly flush with the end of the
support arm. Repeat process on the
opposite end. You will need to stretch the
panel slightly to be flush on that side as
well, giving the panel a smooth, wrinkle
free appearance