Filtreco Drum 100, Руководство пользователя, Страница: 6 / 16

6 drum 100 (pump)
1. What's included
• PP basin
• PP drum with brushes
• 70 micron stainless steel panel
• PP duct
• Water level meter with 3 pins
• Drum motor
• Submersible pump
• Spray tube with 8 sprayers (the first of which has a higher
flow)
• Inlet of your own choice
• 7x 110 mm outlets
• 2x 110 mm drum bypasses
• 1x 1 1/2" drain with ball valve
• Control box
• Cover with safety lock
2. Product description
The drum filter consists of a PP basin containing a PP drum
with mesh. The drum is pump-fed and installed beside the
pond. The inlets are below the water surface level, and the dirty
water is pump-fed through the floor drains or skimmers with
one or more pumps into the first filtration chamber. On the
outflow side, the water flows out of the drum through a siphon
loop. Because the dirty water flows through the drum, contami-
nants in the water cling to the interior of the drum. As a result,
less water can flow through the mesh and the water level on
the inside of the drum rises. The water level meter detects this
and initiates the flush cycle. This cycle consists of activating
the drum motor and spray pump. This causes the drum to turn
slightly more than one full rotation and the sprayers flush the
mesh clean. The flush water then flows into the sewage along
with the waste. The cycle repeats as often as necessary.
3. Assembling the filter
The housing of the filter consists of a PP basin with one
partition. The partition is fitted with a silicone sealing strip at
the flange which separates dirty water from clean. There are
also 2 holes in the partition which are covered with a cap. In
case of a breakdown in the drum control, the covers can be
removed to enable the water to bypass the drum and flow past
it without being filtered. This enables you to still use the
biological filtration segment.
The basin is fitted with a removable waste drain. The inclined
surface accelerates the water flow, causing the waste to be
carried along with it into the drain. There are also 4 brushes
installed on the inside of the drum which sweep away any algae
or other coarse particles that cling to the drain. The drum filter
is fitted with a removable spray tube made of PP, which is
equipped with flat jet nozzles. The sprayers feature a quick-
release system, making them easy to remove for cleaning. The
water level meter in the basin consists of 3 electrodes, 1 flush
level, 2 high-level safeties and 1 common electrode. The water
level for initiating the flush cycle is adjustable. Inside the basin
is a high-pressure submersible pump which supplies water to
the sprayers under high pressure during the flush cycle.
The drum motor is mounted on the outside of the drum filter.
The shaft is enclosed by a retaining ring in the installation plate.
The shaft connects to the drum via a flange with a pipe. To
remove the drum, you can simply detach this pipe-shaft
connection, after which the drum can be taken out. You do not
have to disassemble the motor to do this. The screens can be
removed by detaching the tension straps and unscrewing the
cover panel to remove it.
4. Instructions for use
The Filtreco drum filter and all parts and accessories that it
comes with may only be used as follows:
• for cleaning garden ponds
• according to the user manual and technical specifications
• only with water temperatures b4 ˚C and +35 ˚C.
• only suitable for transporting water
• not for commercial or industrial purposes
• not suitable for salt water
• never use without running water
• never use in combination with chemicals, foods or
flammable/explosive liquids