Filtreco Drum 100, Руководство пользователя, Страница: 10 / 16

10 drum 100 (pump)
8. Control box
The control box consists of a housing with:
• 5 power sockets, namely:
- Pond pump 1 for pond pump 1
- Pond pump 2 for pond pump 2
- Spare for any extra pond pump or other electrical
equipment
Note! These 3 power sockets have a combined total output
of 2500 Watts!
- Spray pump for the high-pressure submersible pump - max.
1000 Watts
- Drum motor for the drum motor - max. 100 Watts
- Main switch to switch the power supply to the box on
and off
9. Control panel (malfunctions)
The control panel is situated behind a locking hatch. It is easy
to unlock this hatch and open it upwards. Always close the
hatch carefully after every use.
1 Start/Stop:
Makes it possible to start and/or stop the flush cycle. This
button can be used either in manual or in automatic mode.
2 reset Error:
Resetting an error/outage. If the error is actually resolved, it is
possible for the system to work normally again. If the error is
reset but still continues to exist, the Error LED will immediately
light up again.
3 Change mode:
By pushing this button, you can switch back and forth between
Auto(matic) and Manual mode. In Manual mode, you can start
or stop one flush cycle by pressing Start/Stop. The flush cycle
will never start automatically in Manual mode. In Auto mode,
the flush cycle is initiated if the flush level is activated (electrodes
detect contamination) based on an increased water level.
4 Change Flush Time:
By pressing the Change Flush Time button, you can change the
flush time.
5 Power LEd:
The Power LED glows green when the system is connected to
power (Main Switch is on).