FilterWater.com
800-439-0263
Copyright
©
2008 filterwater.com
http://www.FilterWater.com
Installing the Turbo Floor Model System
Location
1.
Locate as close as possible to water supply source.
2.
Locate as close as possible to a three-prong grounding receptacle.
3.
Locate the System on a smooth and level floor.
4.
Allow sufficient space around the System for easy servicing.
5.
Provide a non-switched 110/120V, 60Hz power source for the System.
6.
Make sure the System is not moved, tilted or shaken.
7.
Do not locate the System where the environment would offer any risk of water
contamination.
8.
Do not locate the System within or directly adjacent to toilet facilities.
9.
Do not put any other liquid than water into the System.
10.
Do not lay the System on its side.
11.
Do not leave the System on without water supply line running.
12.
Do not use an extension cord. The outlet must be within reach of the power cord.
13.
Make sure The System has a 2” clearance on all sides to insure ventilation
14.
Make sure to install the auto shut-off valve to control and reduce the cold water supply line
pressure to keep at 25 psi to avoid busting.
15.
Hot tank must be filled with water before the System is plugged into a three-prong ground
type receptacle.
All equipment needs to be plumbed into the water system by a licensed plumber.
