FilterWater FW-2000, Руководство по эксплуатации

Страница: 4 / 25

4 | P a g e
CAUTION: The filter version “F” must be used only with softened
water or water that has less than 3.5-grains of hardness to prevent
scaling and premature burnout of the heating elements.
Receiving the Cooler
Unpacking
International H2O products are shipped completely assembled and
ready to operate. Remove the top of the box and slide the water cooler
out and save the box and packing materials.
Inspection
Inspect the cooler for shipping damage. Look at the exterior panels to
see if they have been dented or damaged. Check the dispensing spigots
in the front. Open the bottom panel to assure that the filter system is
intact. Look at the back of the cooler to see if the compressor is secure
and has not broken from the mounting. Inspect filter system to see that
nothing is damaged or dislodged from shipping.
Description Model H2O-2000
The H2O-2000 Model provides water at 3 different temperatures,
dispensed from three spigots, “hot”, “cold” and ambient. The assembly
drawing is shown in Figure 1. Water flows from the filter system into the
ambient tank and the cold water tank simultaneously. The cold tank
then feeds the hot tank which is heated by internal heaters. The level in
the cold water tank is controlled by a float valve mechanism which
controls a 4 way auto-shut off valve on the water feed line to maintain a