8
W A L L M O U N T A B L E C H A R G I N G B A S E
The Charging Base recharges your DirtTamer
Deluxe
™
V2210 vacuum and stores the vacuum with
its cleaning tools for convenient access.
The Charging Base can be mounted vertically
(see Figure A) or placed on a horizontal surface
such as a counter, shelf, etc.
If you choose to wall mount the Charging Base,
please follow these steps:
1.
Pick a convenient position within 6 feet of an
electrical outlet. If the Charging Base will be
mounted closer to an outlet, wrap any excess
cord in the storage area on the back of the
Charging Base.
(Note: Do not use an outlet which is controlled
with a wall switch).
2.
Place the Charging Base against the wall in the
desired location and mark the center of each hole.
3.
Drill a
3
⁄
16
” diameter hole
through the center of the
top mark. Push a Plastic
Wall Anchor into the
drilled hole.
4.
Insert one of the included
screws and turn it until
the screw head is
1
⁄
4
”
above the wall surface.
5.
Recheck that the hole
alignment is straight, then
drill the second hole and
install the other Plastic
Wall Anchor and Screw.
6.
Slide the Charging Base into place making sure
the cord exits through one of the slots.
Wall
Mounting
Base
Charging
Plug
Figure A
Содержание DirtTamer Deluxe V2210
Страница 1: ...CORDLESS WET DRY VAC...
