Filser Electronic GmbH
Gewerbestraße 2
ATR 720 C Communications Transceiver
86875 Waal
page 12
2.6
Cabling
1. The length and routing of the external cables must be carefully studied and planned prior to in-
stallation. Avoid sharp bend placing cables to near the aircraft control cables.
2. Fabricate the external cables in accordance with the installation drawing that fulfills the system
requirement.
-
N O T E –
Use good quality stranded wire that will not support a flame and with al least 600 volt insu-
lation. It is recommended that the mike audio line is shielded.
Since other radio equipment will possibly utilize the same speaker circuits for muting, speaker selection and
microphone switching must be devised by the installing agency.
Figure 2.3 Outline and mounting Drawing
All dimensions in mm
