FILM LIGHT Truelight SDI, Руководство пользователя

Страница: 22 / 36

Chapter 4 – Operation
Front panel
Truelight SDI User Guide
18
Bypass mode Pressing button 0 toggles the bypass function on and off. When the unit is in bypass mode,
all colour transform processing is bypassed. However, the input and output processing is
still enabled. This means that the unit still re-clocks the input data and also applies
legalization if the legalizer is switched on.
Bypass mode is indicated by a letter B in the top right-hand corner of the LCD display on
the front of the unit.
Legalizer The Truelight SDI unit has the ability to ensure that only legal video is displayed (that is,
output values are limited to the 64-940 range for 10-bit video). This is achieved by clipping
the output RGB or luminance/chroma values to this range. Note that the use of the
legalizer depends on the nature of the video being fed into the unit and also on how the
output data is to be subsequently processed.
The legalizer can be toggled on and off by holding down the 0 button and pressing the 4
button on the front panel—when the legalizer is enabled, a letter L appears in the top
right-hand corner of the LCD.
Cube Button Description
Cube 1 Button 1
Cube 2 Button 2
Cube 3 Button 3
Cube 4 Button 4
Cube 5 Button 0 + Button 1
Cube 6 Button 0 + Button 2
Cube 7 Button 0 + Button 3
Cube 8
Cube 9 2nd Press button 1 Normally gamut alarm version of Cube 1
Cube 10 2nd Press button 2 Normally gamut alarm version of Cube 2
Cube 11 2nd Press button 3 Normally gamut alarm version of Cube 3
Cube 12 2nd Press button 4 Normally gamut alarm version of Cube 4
Cube 13 2nd Press button 0 + 1 Normally gamut alarm version of Cube 5
Cube 14 2nd Press button 0 + 2 Normally gamut alarm version of Cube 6
Cube 15 2nd Press button 0 + 3 Normally gamut alarm version of Cube 7